*T-Bar included
“The Musclechuck makes fitting
and removing cutters a pleasure with all forms
of routing. You only need a batch of work involving
frequent cutter changes to appreciate its benefits.”
 Ron
Fox in The Woodworker magazine
|
Introducing
The New, Musclechuck: Change Bits In Seconds
The Musclechuck
is a high quality replacement collet, which gives
your router just the right amount of extra depth.
A quick turn of the
t-bar is all that's needed to securely attach
any router bit.
Undo and the bit drops away:
place the new bit – with reducing sleeve
if needed, tighten the hex key, and it’s
ready for use. It’s
balanced, simple and it really is quick.
Prices
EU:
£51.94 (inc.VAT/ex.shipping)
WW:
£42.45 (ex.shipping)
USA:
$81.94 (inc.shipping)
Compatibility:
Type 1: Fits Porter
Cable; 630, 690, 691, 693, 7518, 7519, 7536, 7537,
7538, 7539 only. Does not fit 890 series routers.
Type 2: Fits DeWALT
625; FESTOOL OF 1400 EQ PLUS USA; FESTOOL OF 2000
E-PLUS USA; ELU 177; TREND T9 & T10 &
T11; CMT’S 1850 & 2000; FREUD FT1700VCE,
2000; FEIN RT1800, 2000 & METABO 1612.
Type 3: Fits DeWALT
616, 618, 621 (US Type
Only); HITACHI M-12VC, M-12SC, M12VS.
Type 4: Fits BOSCH
1623 AEVS, 1617 EVS, 1618 EVS, 1619 EVS, 1400E,
GOF2000, MAKITA 3612C.
Maximum diameter: 1.20 in (+/-.010).
Maximum length: 1.30 in (+/- .010).
Standard Bore: .500 in (+.0005/ -.000) –
Other size & tolerances available.
Weight: 3.5 oz (Approximate – depending on
the particular model).
Concentricity: <.001 in.
Material: Chrome-Moly Steel (Aircraft grade).
Hardness: 39<Rc<42. (Mil-H-6875)
Coating: Electroless Nickle (Rc~40 hardness to
AMS-C-26074 Class 1)
Cap Screw: 5mm Grade 8 or better certified.
Warranty: 30 day money back guarantee including
shipping & handling.
Maximum recommended torque for attaching nut:
12 ft-lbs.
Maximum recommended torque for cap screw: 125
in-lbs.
Slip torque: Approximately 435 in-lbs.
Mechanical Advantage: Approximately 3.5/1
Note: (1) All materials and processes certified
to aircraft standards.
(Certifications are available upon request)
(2) Each assembly checked and tested for operation
individually.
Specials or Modifications: Consult factory.
|
