
Router shown for illustration. Router not included.
Made in England
WoodRat WR900
The complete router joinery machine. Dovetails, mortise and tenon, box joints and more, with the router you already own.
£850
Free UK delivery. No VAT to add. Ships worldwide: outside the UK, import charges may be due on delivery. Delivery and import charges
Free £59 dovetail cutter in the box. The WR-8-7-16-8, our best-selling cutter. For through dovetails, pair it with the WR-8-S-42-8 straight cutter, sold separately at £59.
Included
WR900 machine, guide rails, raising plate, parallelogram, centre liner, spares bag, printed manual and the free WR-8-7-16-8 dovetail cutter. Full list
You'll need
A plunge router (any make) and a wall or sturdy board to hang it on.
Optional
A PlungeBar for one-handed depth control, the WR-8-S-42-8 straight cutter, and cutter sets for more joints.
- 6-year warranty, parts and labour
- 90-day workshop trial. You pay return postage. Terms
- Fits any plunge router. Check yours
- About 12,500 sold since 1988
Why a WoodRat
Not another jig. A machine for every joint.
Three axes, one machine
It guides the router left and right, forward and back, and up and down. A router table works on one.
See the cut, cut to a line
The router is the right way up and the wood doesn't hide the bit, so you mark the wood and cut to your pencil line.
No templates to buy
No fixed fingers or combs. You decide how big the joints are and where they go, evenly spaced or not.
Clean shoulders
The built-in powerfeed lets you down-cut in either direction, so cross-grain cuts come out clean, with far less tearout than on a router table.
On the wall, out of the way
No stand and no bench space. It hangs on the workshop wall, ready to use, with extraction right behind the cut.
Your router, standard bits
Fit the plunge router you already own and use standard shank router bits, not just special cutters. WoodRat cutters are matched to the machine for the best results.
Martin Godfrey drew every part of the machine himself. This is how it cuts dovetails: the parallelogram spaces the joints, and the spirals set the fit of the pins for the wood you're using.
Will my router fit?
Fitting the machine: any plunge router fits the WR900, whatever the make. It bolts to the supplied router plate.
Fitting a PlungeBar (optional): a PlungeBar gives one-handed depth control: squeeze the bars and the cutter drops into the work. Each bar is made for particular routers, so find yours below or send us the model.
| Type A | DeWalt DW624, the older DW625 and DW629, ELU 3338 and MOF 177, CMT 1850 W, Trend T10 and T11 |
|---|---|
| Type B | Most 1/4" routers, including Trend T5, Makita 3620, RP0910 and RP1110C, Bosch POF 400 A, DeWalt 613 |
| Type C | Bosch 1615, 1617 EVS plunge base, 1619 EVS and GOF 1600 ACE, Hitachi M 12 V, Ryobi RE 600 and 601 |
| Type D | Most 8mm routers, including Bosch GOF 900 and GOF 1300 ACE, DeWalt 618, 620 and 621, Axminster White 127, Charnwood P220 |
| Type E | Porter-Cable 7529 and 8529, Flex OF2926 BE |
| Type F | Bosch 1617 EVS (other bases: send us a photo to check), DeWalt DW616 and DW626, Trend T9, Metabo OF 1612, Makita 3612C, FEIN, Mafell LO 65 E |
| Type G Coming soon | The current DeWalt DWE625 1/2" router (the older DW625 is Type A). Reserve yours, no payment until it ships. |
Own a Triton or Festool? The WR900 works with your router now, and PlungeBars for both are in development. Not sure? Email us your router's make and model and we'll tell you which PlungeBar fits before you order.



Cutters made for the machine
WoodRat cutters are matched to the way the machine works, so setting up a joint is quick and repeatable. Every WR900 comes with our best-selling dovetail cutter, and the sets build from there: Set 1, Set 2, a fill-in set and a drawer-front set.
See the cutter rangeComplete your setup
What owners add next.
In the box
- WR900 machine
- Free WR-8-7-16-8 dovetail cutter (worth £59)
- Full printed manual
- Raising plate
- Aluminium guide rails
- Centre liner
- Flightpath sticker and parallelogram
- Spares bag with an extra wire and blue pawl
- Pile-carpet section for upward support when profiling
- WoodRat Owner badge
You supply
- A plunge router, any make
- A wall or bench to mount it on
- Extra cutters for other joints, when you want them
Specifications
| Joints | Dovetails: through, half-blind (lapped), secret mitred and sliding, spaced as you like, from 8 mm to 50 mm. Mortise and tenon, including haunched, twin, angled, tusk and round-ended tenons. Bridle and mitred bridle joints, box (finger) joints, knuckle joints, housings and dados, grilles and louvres, raised and fielded panels, tongue and groove, crosscuts and router table work |
|---|---|
| Router | Any plunge router. PlungeBar optional |
| Mounting | Wall-mounted, so it takes no floor space |
| Shipping weight | 19 kg (42 lb) boxed |
| Box size | About 93 × 39 × 16 cm (37 × 15 × 6 in) |
| Warranty | 6 years, parts and labour, original owner |
| Made in | England |
Questions
How quickly will it arrive?
Machines are dispatched within seven days, usually sooner, and UK delivery is free. We email tracking when it leaves us.
What does the warranty cover?
Six years from delivery, for faults in materials or workmanship, for the original owner. We send replacement parts free, and if the machine needs to come back, we arrange and pay for it. It doesn't cover cutters, normal wear, or damage from misuse or accidents. Full terms.
What if I don't get on with it?
Set it up and cut test joints. If it isn't for you, send it back complete within 90 days of delivery for a full refund of the machine price. You pay the return postage and keep the free cutter. Outside the UK, the original delivery, duty and taxes aren't refundable. Full terms.
Delivery and import charges outside the UK
We ship worldwide. Delivery on a WR900 is £29.95 to the EU and £75 to the USA, Australia and the rest of the world. Import duty, local taxes and the courier's handling fee aren't included in our price: the courier collects them from you on delivery, and the amount depends on your country's current rules. Email us before you order and we'll give you a delivered quote.
Is it hard to learn?
It takes a little practice, like any good tool. The printed manual covers every joint, and we run hands-on training days in the UK if you'd like help in person.
Will older WoodRat accessories fit?
Most accessories fit older WoodRat machines, and most new accessories fit the WR900. Ask us if you're not sure.



