Learn
Every joint, step by step.
How the WoodRat cuts dovetails, tenons, mortises and more, written by its inventor, Martin Godfrey. Start with a joint, or download the full manual.
Techniques

Dovetails
Through, lapped and fine 1-in-9 drawer dovetails, from 8mm to 50mm, in boards up to 760mm wide.
Read more
Tenoning
Square, clean-shouldered tenons in four hits, including haunched, twin and compound angled.
Read more
Mortising
Mortises with a PlungeBar and a mortise rail, plus raised and fielded panels.
Read more
Crosscutting and housing joints
Dados, sliding dovetails for shelving, grilles and louvres.
Read more
Batch cutting and box joints
Cut a stack of identical joints at once, all to one setting.
Read more
Router table work
A right-way-up router table: edging, grooves and stopped cuts you can see.
Read more
Working with the Pathfinder
Round-ended tenons, five-minute drawer dovetails and shapes from templates.
Read moreManuals and help
Choosing a router joinery system
WoodRat vs Leigh
A specialist dovetail jig or one machine for every joint? A straight comparison.
CompareRouter Boss alternative
Router Boss is discontinued. How the WR900 compares.
Compare99 reasons to buy a WoodRat
Martin Godfrey's own list of what the machine does that a jig or router table can't.
Read the listWhat owners say
Furniture makers and woodworkers in the UK, US and Canada.
Read reviewsCut on a WoodRat
Learn it hands-on
Small-group training days in the North and South of England. Bring your questions and leave with joints you cut yourself.