Learn

Router table work

Hand-feeding work under the WoodRat

Anything you can do on a router table you can do more easily on the WoodRat: decorative edging, edge joints such as tongue and groove with matched cutters, and grooves for drawers and box lids.

Because the router is the right way up, you can depth the bit without lifting the machine off the floor, change bits easily, and see where you're cutting. You can make stopped grooves that don't spoil your joints, when recessing box lids or grooving for box bottoms, because you can cut to a line.

A right-way-up router table

With the router locked down, the work is hand-fed under the plates and the machine works like a router table the proper way up. You can start and stop the cut where you like, see it as you make it, and drop the bit into the work exactly where you need.

Work to the wood, not the machine

A router table relies on gravity to keep the work on the table. On the WoodRat, a brush or a pad of carpet acts as a feather-board pushing upwards.

Brush or carpet?

We used to include a bristle scrubbing brush in the kit. It gave an upward push and instant protection for the fingers, preventing kick-back. When our supplier stopped stocking them we tried a piece of pile carpet tile on a wood block, and it works better: it can be cut to any useful size. That, and keeping the bit tucked up in the router when not cutting, makes for safer, better work.

Acrylic plates

The bit beneath the plate is brought forward and locked down to cut the work. There are gaps around it, in the Channel behind and the Base Plate above, and the work mustn't fall into them and spoil the cut. That matters most with small pieces, and for your fingers, but the fix is easy.

Two acrylic plates, one as a back wall and one as a ceiling, stop the work falling into the gaps however small it is. The bit is plunged through the plates to groove the wood, your fingers stay well clear, and small pieces can be lifted into the bit and dropped out to stop a groove before it spoils a joint.

Today's wide range of mini profiling bits can then be used for fine detailing, on projects like classic doll's houses, in perfect safety.