
Throughout woodworking history, from the ancient pyramids to the present day, when putting two boards together to joint a chest, a box or a drawer, the strongest and best looking joint has always been the dovetail. It is one of many joints you can cut with the WR900 router joinery machine.
Cutting dovetails by hand is an acquired skill. However practised you are, they still take a lot of time and can be arduous if there's lots to do. Dovetails sell a piece, but they tend to price themselves out of the jobs that really need them.
We set ourselves the task of making a tool that cuts dovetails of any kind, that would grace a project of the finest craftsmanship, and that would be quick and easy for beginner and expert alike.

A whole new approach
The WoodRat looks nothing like a dovetail jig, and with good reason. Instead of finger templates dictating where your dovetails go, you're free to position joints wherever you like across your board. There are no guide bushes, as the router is held firmly on plates.
Dovetail jigs tend to make heavy weather of dovetails, and the joints look machine made, especially with tungsten carbide tipped bits. They are often cumbersome to use and not very accurate. The WoodRat is very different.
Versatile, simple, accurate
The unique feature of WoodRat dovetailing is the two holding positions on the Sliding Bar: one under the router on the right for cutting, and one against a free space on the left for positioning marks on the machine.
Cut a socket in wood on the right, lock it in place on the left, and stencil a picture of that socket with a sharp pencil. The socket is the size and shape of the bit that cut it. That's the "Mark" on the machine face.
You then have the Mark (the picture of the bit, on the left) and the actual bit (on the right) fixed in the machine, with the two fences holding work under the router and in front of the Mark, tracking left and right and moving together.
You cut the sockets first with a dovetail cutter, running square to the machine face. Place the sockets where you need them, and the parallelogram will mark out your board with equal spacings when you want them.
You then use that cut board as a template for cutting the pins to fit the other board. You make your own templates as you go. The marking needs no more than a sharp pencil, the dovetail cutting is done by the machine in one hit, and because you control how you cut, you can virtually eliminate breakout.
Dovetails great and small
The WoodRat copes with a huge range of scale, from 8mm to 50mm deep, in boards up to 760mm (30") wide. It goes smaller, bigger and wider than any other dovetailer on the market.
Use any dovetail cutter
The Spiral Cams let the router cut forward at any angle, so you can cut pins to fit a tail made with any dovetail cutter. We sell a range of high-speed steel bits with the elegant 1-in-7 slope for classic looking joints, and extra-fine 1-in-9 cutters for needle-pin drawer-front dovetails.

Lapped dovetails for drawers
We took great pains to make sure the machine would make proper classic drawers, correct in every detail: the back pins placed differently from the front pins, the bottom pin above the drawer groove, and the top one down a little so the drawer sides can be chamfered to ease the drawer into its frame.
When making dovetailed drawers, you can mark up the front sockets, cut them, somersault the marker board, mark it up differently and then cut the back tail sockets. You can keep the same depth setting for the back as for the front, which gives a good deep socket to hold a light, thin back board.
The sides can be very thin too, so the drawers are light but strong.
High-end drawers with veneered fronts might need cocked beading to protect the veneer, and a lock set into the back of the drawer front could need an inlaid escutcheon. All this is well within the WoodRat's capability.
A new life for dovetails
Because they are costly to make, modern furniture uses dovetails sparingly. Yet drawers can be an exciting part of any project, and a well made drawer can sell a piece of furniture just as a machine-made one can let it down. The WoodRat brings a real boost in productivity where dovetails are expected but take time.
And it isn't only for the skilled craftsman. It shifts a beginner up through the gears too. There is nothing to fear and everything to gain from starting with a WoodRat.